(1) Overview

Prof. H. C. Patel is Asst. Prof. in Mechanical department at Smt. S R Patel Engineering College Unjha since December-2013. He has 7 years of teaching experience including UG. He has also received Best Faculty Award -2016 from Smt. S R Patel Engineering College, Unjha.

(2) Area of Interest

CAD/CAM, Automation, Robotics, Production

(3) Education

Ph.D. (pursuing) from Ganpat University, Kherva, Mehsana
M.Tech. (CAD/CAM) from Ganpat University, Kherva, Mehsana
B.E. (Mechanical) from Govt. Engg. College, Bhuj

(4) Professional Experience

Prof. Patel is presently serving as an Assistant Professor in Mechanical Engineering Department (Smt. S.R. Patel Engineering College, Unjha) since December 2013. He worked with K.D. Polytechnic, Patan as lecturer from 9th Feb 2009 to 20th Oct 2010.

(5) Research

He has published/presented 10 technical papers in international/national journals and conferences. He has attended more than 15 faculty development programmes.

• 1. Harshad C Patel, “Parametric Analysis And Mathematical Modelling of MRR And Surface Roughness For H-11 Material On Wire Cut EDM By D.O.E Approach” Published in International Journal of Engineering Research and Applications (IJERA) ISSN: 2248-9622, Vol. 2, Issue 4, July-August 2012, pp.1919-1924.
• 2.Harshad C Patel, “Review on Current Research Trends in Wire Electrical Discharge Machining (WEDM)”, Published and Present in National Conference on Innovative & Emerging Technologies (NCIET) held at S R Patel Engineering College - Dabhi, April 2015, ISBN 978-81-925650-0-2, p.p. 394-400.
• 3.Harshad C Patel, “Mathematical modeling on co2 laser cutting parameters of AISI304”, Published in International Journal for Innovative Research in Science & Technology(IJIRST), ISSN (online): 23496010, Vol. 1, Issue 2, July 2014
• 4.Harshad C Patel, “Parametric analysis and mathematical modelling of Kerf Width, MRR and Surface roughness for H-11 material on wire cut EDM by D.O.E. approach”, Published and Present in National Conference on Innovative & Emerging Technologies (NCIET) held at Smt. S R Patel Engineering College - Dabhi, Jan 2013, ISBN 978-81-925650-0-2, p.p. 215-220.
• 5.Harshad C Patel, “ A Review on Tip Clearance Flow and Secondary Flow Losses in Linear Turbine Cascade” Published in IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN: 2278-1684,p-ISSN: 2320-334X, Volume 11, Issue 3 Ver. VIII (May- Jun. 2014), PP 33-37.
• 6.Harshad C Patel, “ Parametric analysis and mathematical modelling of MRR and surface roughness for H-11 material on wire cut EDM by D.O.E approach”, Presented in Knowledge Way – Paper Presentation, National Conference “Techno Planet - 2012” held at R. K. UNIVERSITY, Rajkot, with 1st Prize, March 2012.
• 7.Harshad C Patel, “Effect of Ball Burnishing Force and Number of Ball passes on surface characteristics of C 20 Component”, Published in National Conference on Innovative & Emerging Technologies (NCIET) held at S R Patel Engineering College - Dabhi, April 2015, ISBN 978-81-925650-0-2, p.p. 313-316.
• 8.Harshad C Patel, “Development and Comparison of Mathematical Model for EN19 Material Using Statistical Analysis Software on WEDM”, Published in International Journal of Advance Engineering and Research Development (IJAERD), Volume 1,Issue 12, December -2014, Scientific Journal of Impact Factor(SJIF): 3.134, e-ISSN(O): 2348-4470, p-ISSN(P): 2348-6406.
• 9.Harshad C Patel, “Analysis of the Heat Affected Zone in CO2 Laser Cutting of Stainless Steel” Published in International Journal for Scientific Research & Development(IJSRD) Vol. 2, Issue 11, Nov, 2015, ISSN (online): 2321-0613.
• 10. Harshad C Patel, “Experimental Investigation of Centrifugal Pump Regular and Reverse Mode”, Published in International Journal for Scientific Research & Development (IJSRD) Vol. 2, Issue 11, Nov, 2015, ISSN (online): 2321-0613.
• 11.Harshad C Patel, “Optimization of Kerf Width, MRR and Surface Roughness of H-11 Material Machined with Wire Cut EDM Process Using Grey Relation Analysis” Published in International Journal on Recent and Innovation Trends in Computing and Communication(IJRITCC) ISSN: 2321-8169, Volume: 3 Issue: 12, Dec-2015, P.P.- 6536 – 6542
• 12. Harshad C Patel, “Design and Development of CNC Milling Machine”, Published and Present in National Conference on Innovative & Emerging Technologies (NCIET) held at S R Patel Engineering College - Dabhi, June 2016, ISBN 978-81-925650-0-2, p.p. 409-415.
• 13. Harshad C Patel, “Design and Development on Conventional Lathe Machine”, Published and Present in National Conference on Innovative & Emerging Technologies (NCIET) held at S R Patel Engineering College - Dabhi, June 2016, ISBN 978-81-925650-0-2, p.p. 493-498.
• 14. Harshad C Patel, “Review Paper on Automated Guided Vehicle (AGV)”, Presented in LaaTeqnix National Level Technical Festival held at L. D. College of Engineering, Ahmedabad, March 2011.